WRAP-UP Next 0490-FD - M-CONCEPT YD-2 VX-DOCK Specification Short Wheelbase Conversion Kit
WRAP-UP Next - 0490-FD - M-CONCEPT YD-2 VX-DOCK Specification Short Wheelbase Conversion Kit
New release of short wheelbase conversion for YD-2. Multi-designed for both YD-2E / YD-2S and easy conversion with your existing YD-2. In addition, if the VX-DOCK specification is released at the same time, VX-DOCK around the front and build-in of the servo will ensure extra mechanical space. Body recommended 225mm, long body can be mounted depending on the device. A front 50mm suspension shaft is attached. By expanding the front and rear suspension mounts, YD-2 standard suspension arms as well as other branded suspension arms such as wrap-up Y arms can be used. With adjustment spacer.
Can be assembled in 4 patterns.
■ 2.5mm graphite main chassis (pure carbon)
■ Graphite battery holder
■ 3x50mm stainless steel suspension shaft (for front)
■ 3mm Duracon spacer set
Only VX-DOCK specifications are included
■ Upper deck mount for VX-DOCK
■ Graphite upper brace
■ Connecting post
Body mounting example:
The photo shows Tamiya's roadster and wide fender.
Wheelbase is 225mm, body width is 180mm front
Finished at 185mm rear.
Use suspension mount reference example:
FF / FR: 39.5mm
RF / RR: 48.7mm / 49.6mm
Or RF / RR: 48.0m / 48.7mm
Both toe-in is about 0.5 degrees
Use suspension arm reference example:
Front: Y2-008FLS Front Short Lower A Arm for YD-2
Rear: Y2-008RS Short rear suspension arm for YD-2 series