Yokomo RDR-010-1 - RD 1.0 Rookie Drift RWD Chassis Kit
Yokomo - RDR-010-1 - RD 1.0 Rookie Drift RWD Chassis Kit
Introducing the new assembled drift car "Rookie Drift RD1.0", which has a flexible and highly adaptable resin main chassis and a sealed gearbox, making it ideal for street drifting!
The double wishbone suspension supported by oil-filled dampers and drift-specific springs firmly grips the road surface, and combined with the overwhelming steering angle, it is possible to drive at deep drift angles. The responsive 3-gear transmission also contributes to optimizing the weight balance, reducing understeer that can be fatal when drifting, and achieving long-range drifting.
Even with the standard kit, it is possible to adapt it to various driving conditions by changing the settings, but by incorporating many optional parts that are already on sale, you can create an original machine with even higher driving performance. From suspension settings to drivetrain tuning, carbon parts to reduce weight and aluminum parts to increase rigidity, you can enjoy the menu just like a real tuned car.
- Overall length: 425mm
- Overall width: 198mm
- Wheelbase: 256mm
- Secondary reduction ratio: 1:2.6
- Weight of all equipment: 1500g
- 3-gear rear transmission
- 3-split sealed gearbox
- Integrated front bulk made of resin Head
- Four-wheel independent double wishbone suspension
- Front short suspension arm
- High-performance height-adjustable oil damper
- Resin one-piece main chassis
- 13-step adjustable aluminum motor mount
- RWD exclusive high-angle steering system
- 49mm bone rear universal shaft
- LS rear lower suspension arm
- Large rear diffuser
* The photo is an assembly reference example. As this is a prototype, it may differ from the actual product.
The highly reliable undercarriage is available with a wide range of optional parts to improve performance, making it possible to respond to a variety of driving conditions.
Equipped with a large urethane bumper to protect the chassis from an unexpected crash.
The steering angle, which is important in drifting, is overwhelming. Improved controllability even at deep drift angles.
Since you can select the mounting position of the motor from 13 levels, it is also possible to change the driving characteristics by changing the weight balance.
Chassis rigidity can be changed by rearranging the rear brace. Placing it on the lower side allows the motor to be mounted lower, promoting a lower center of gravity.
Two types of battery holders are included, so you can install a standard size battery, which is often used as a battery for RC cars, or a short size Li-po battery, which is preferred by advanced users.
Equipped as standard with an oil damper that dampens oil by sealing oil inside the cylinder. Vehicle height can be easily adjusted by adjusting the spring tensioner.
3 gear transmission with good response. The sealed gearbox protects the gears from sand and pebbles that get kicked up while driving.
The gearbox is a 3-part type, and maintenance of the differential can be easily performed by removing the rear case cap.
What you need to run the assembled kit
: 2-channel radio set (transmitter, receiver, speed controller, servo), steering gyro, battery (Li-po 2 cells), charger, 1/10 size drift tires. Wheels, motors, 1/10 size drift bodies, polycarbonate paint